Tena Flex Normal - LARGE
34 belted briefs - Hip measurement: 83 to 120 cm
€22.50
Tax included
Secure payment
Fast delivery
Customer service
Tena Flex Normal description
Tena Flex Normal is a non-woven belted brief brought to you by Tena.
Tena Flex Normal is put in place with a self-adhesive waistband.
- For moderate urinary and faecal incontinence.
- Suitable for men and women.
The full Tena Flex range
To find out which products in our range are best suited to your needs, here is a summary table showing the various absorption products and available sizes:
Tena Flex | ||||
Normal M - L |
Plus S - M - L - XL |
Super S - M - L - XL |
Maxi S - M - L - XL |
Ultima S - M - L - XL |
Tena Flex application technique
In standing up position
In suspine position
- Open the protection and shape it into a groove.
- Determine the position and fixation of the Tena Flex in consideration of the patient. Adjust the fixation strip on the patient's body. On skinny people, it needs to be fastened higher up whereas it should be fastened lower down on more corpulent wearers.
- Close the fixation strip using the self-adhesive Superfit fastener.
- Slide the protection between the legs in a zig-zag motion from the back to the front. Doing so will shape a dish around the front of the protection. Then firmly pull the protection up so it sits properly adjusted in the groin skin folds. As applicable, make sure the skin does not fold or gets rucked up inside the protection. Use the urine indicator line as well as the colour strip as a marker to correctly position the protection.
- Finally, fasten the protection using the 2 adhesive strips on the waistband. Correctly readjust the elastic bands. If the incontinent person needs to be moved, check the fit of the Tena Flex. If need be, reposition the adhesive strips on the self-adhesive strip.
- The elastic bands that are anatomically preshaped to suit the legs must be positioned towards the outside of the protection. The Tena Flex pad closes both around the patient's belly and around his back.
Tena Flex Normal Large Characteristics
Tena Flex Normal Large | |
---|---|
Hip Size | From 83 to 120 cm |
Number of pieces per pack | 34 Pieces |
Number of packs per carton | 3 packs |
Reference | 722514 |
Pack colour | Yellow |
Number of drops |
Technical sheet - Tena Flex Normal - LARGE
Brand
Range
Reference
722514
Type of product
Belted briefs
Size
Large
Hip measurement
83 - 120 cm
Type of incontinence
Urinary and faecal
Number of pieces per pack
34 pieces
Number of packs per carton
3 packs
Number of drops infoNote: the drop labelling system is specific to each brand and may only be compared within the same brand
5 drops
Level of absorption
Moderate
Colour of absorption
Yellow
Exterior texture
Non-woven (cotton effect)
Interior texture
Non-woven (cotton effect)